瞬态(计算机编程)
机械
压力(语言学)
涡轮机
流量(数学)
瞬态分析
瞬变流
甩负荷
控制理论(社会学)
结构工程
材料科学
瞬态响应
工程类
物理
机械工程
计算机科学
电气工程
浪涌
操作系统
哲学
人工智能
控制(管理)
语言学
作者
Fan Yang,Guiying Xu,Jun Yi Guo,Zhongbin Li,Yi Luan,Fangping Tang
标识
DOI:10.1016/j.aej.2024.05.003
摘要
To explore the structural dynamic characteristics of the impeller and shaft system of the axial flow pump as turbine, the variation law of impeller transient equivalent stress, deformation, and the impeller and shaft system mode are analyzed by the transient fluid-structure interaction method. Findings indicate that the equivalent stress is centralized at the blade root around the hub and tends to decrease as it moves towards the shroud. The maximum equivalent stress at 1.0Qbep and 1.1Qbep is 1.26 times and 2.0 times higher than that at 0.8Qbep. Blade deformation is significantly influenced by flow rate. The maximum deformation of the blade at 1.0Qbep and 1.1Qbep is 1.6 times and 3.6 times higher than that at 0.8Qbep. The impeller and shaft system with prestress in dry mode has an average natural frequency of the first 10 orders that is 16.7 Hz higher than without prestress. However, with the fluid adding mass and flow damping, the average natural frequency of the first 10 orders of the impeller and shaft system in wet mode is reduced by 278.08 Hz compared with dry mode. In fact, the impeller and shaft system of the axial flow pump as turbine is not prone to vibration.
科研通智能强力驱动
Strongly Powered by AbleSci AI