Experimental study on strengthening steel-truss bridge diagonal members using carbon-fibre-reinforced polymer bonding methods

This study investigated the effectiveness of carbon fibre-reinforced polymer (CFRP) materials in strengthening the diagonal tension members of steel-truss bridges. Monotonic tensile and cyclic loading tests were performed on CFRP-strengthened specimens with variations in the CFRP-bonding range on the flanges. This study focused on the strengthening methods A and B, which were proposed to address insufficient CFRP anchoring near gusset plates by bonding CFRP sheets to both sides of the flanges of the diagonal tension members. The results of the monotonic tensile loading tests indicated a significant increase in tensile stiffness and substantial improvements in yield strength (27%) and ultimate load-bearing capacity (51%) when the strengthening methods A and B were employed. Delamination of the bonded CFRP sheets was effectively delayed, occurring only after the steel yielded, owing to the use of a ductile adhesive (polyurea putty). On the other hand, the cyclic loading tests demonstrated a significant enhancement in the load-bearing capacities (33% for tensile, 32% for compressive) of the strengthened specimens. Moreover, the energy dissipation capacities of the specimens strengthened by methods A and B exhibited linear increases, with 12% and 14% higher values respectively than those of the non-strengthened specimen. Although the stiffnesses (tensile and compressive) of the strengthened specimens decreased in each loading loop, the strengthening methods A and B maintained the stiffness values at approximately 35% higher than those of the non-strengthened specimen.