3D reconstruction and volume measurement of irregular objects based on RGB-D camera

Abstract To address the challenge of measuring volumes of irregular objects, this paper proposes a volume measurement method based on 3D point cloud reconstruction. The point clouds of the object with multiple angles are obtained from an RGB-D camera mounted on a robotic arm, and then are reconstructed to form a whole complete point cloud to calculate the volume of the object. Firstly, the robotic arm is controlled to move to four angles for capturing the original point clouds of the target. Then, by using the rotation and translation matrices obtained from the calibration block pre-registration, the point clouds data from the four angles are fused and reconstructed. Subsequently, the issue of missing bottom point cloud data is addressed using a bottom-filling algorithm. Following this, the efficiency of the point cloud volume calculation algorithm is enhanced through the application of axis-aligned bounding box filtering. Finally, the reconstructed point cloud volume is calculated using a slicing algorithm that integrates 2D point cloud segmentation and point cloud sorting. Experimental results show that this method achieves a volume measurement accuracy of over 95% for irregular objects and exhibits good robustness.