The Integrated Production Umbilical (IPU«) and Design Tools for Deep Water

生产(经济) 计算机科学 制造工程 工艺工程 石油工程 工程类 经济 宏观经济学
作者
Ole Heggdal
出处
期刊:Offshore Technology Conference 被引量:3
标识
DOI:10.4043/17157-ms
摘要

Abstract The umbilical technology is now extended to include large bore flowline/ riser and HV- power cables in deep water. Extensive development programs including advanced design verification tools, that gives high confidence in the new generation of deep water umbilical products. The development of the IPU solutions started back in 1998 are now completed and numerous field applications have been studied. To enable application of the IPU technology to any scenario, the USAP has been developed and applied with success and high accuracy. The USAP computer program analyzing stress of separate helix elements wound around a central core and exposed to tension, pressure, temperature, friction or residual strain during reeling, installation or operation. The use of more advanced tools improves the confidence and understanding of the products and will reduce the requirements for testing in the future. Trough the work performed on Gas Lift Risers, Integrated Production Umbilical (IPUÖ) and other deepwater umbilicals we have increased the knowledge in designing more complex umbilicals. The paper will also present the design tools used in the engineering, fabrication, installation and operational testing. INTRODUCTION Based on the knowledge and experience acquired during several years of development work, the feasibility of using more complex umbilical and flowline technology is now possible. Use of alternative technologies for the future exploitation of the hydrocarbon resources will offer a great number of advantage. The main performance requirements of such solutions are addressed with respect to flow assurance, electrical design and structural behaviour. Within one single system the following can be included:thermal insulationelectrical heatingHV- power cables 400mm2for gas separation subseaThermal monitoringStress releaving members to enable deep water installation of electrical conductors.Large bore tubes and pipes from 4-10"All control umbilical functions Figure 1: Typical IPU design (Available in full paper) In the last 5 yers significant amount of development work are done to develop design tools that can be used to determine the global and local stress and strain within the more complex structures. The aim of this paper is to show:–Examples of design tools and how these design tools can be used.–Testing done to verify that the analysis tools give good correlation to the test results, regards local and global structural behaviour, thermal insulation and electrical design.–The IPU technical status and describe the manufacturing process.–The qualification methology and the test metodes used to demonstrate that the technology gaps are closed in accordance with the requirements of the DNV Recommended Practice RP-A203 Qualification Procedures for New Technology USAP Analysis Features The computer program USAP has been developed in order to enable evaluation of the stresses and forces hat occur during installation and operation of umbilicals and IPUÆs. It focus on the effects that are of special importance for deep water concepts and can be used to determine both global and local behaviour including loads that distribute stress and strain away from the location were the load was applied.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
虫虫冲呀冲完成签到 ,获得积分10
1秒前
电子屎壳郎完成签到,获得积分10
1秒前
悦耳的惠完成签到 ,获得积分10
3秒前
王俊1314完成签到 ,获得积分10
4秒前
hym完成签到 ,获得积分10
6秒前
生动觅柔完成签到,获得积分10
6秒前
晨光完成签到,获得积分10
9秒前
自然的雨琴完成签到,获得积分10
9秒前
XWT完成签到 ,获得积分10
10秒前
流星雨完成签到 ,获得积分10
10秒前
LY完成签到,获得积分10
11秒前
14秒前
啾rr完成签到 ,获得积分10
16秒前
Iris完成签到,获得积分10
17秒前
成就鑫完成签到 ,获得积分10
18秒前
21秒前
Fyh19901116完成签到,获得积分10
22秒前
Rei完成签到,获得积分10
23秒前
王平安完成签到 ,获得积分10
23秒前
SciGPT的应助被酷酷的怀莲采纳,获得10
24秒前
求助完成签到,获得积分0
25秒前
lll完成签到 ,获得积分10
25秒前
高高的咖啡豆完成签到 ,获得积分10
26秒前
yyy2025完成签到,获得积分10
27秒前
27秒前
riooo完成签到,获得积分10
28秒前
自觉的梦桃完成签到 ,获得积分10
28秒前
miracloon完成签到,获得积分10
28秒前
sqf1209完成签到,获得积分10
29秒前
lm完成签到 ,获得积分10
29秒前
jixuchance完成签到,获得积分10
30秒前
31秒前
米鼓完成签到 ,获得积分10
31秒前
超越俗尘完成签到,获得积分10
33秒前
Mark2025完成签到 ,获得积分10
33秒前
yjy完成签到 ,获得积分10
33秒前
神奇高乐高完成签到 ,获得积分10
34秒前
无限的隶完成签到 ,获得积分20
34秒前
小张同学完成签到,获得积分10
35秒前
初景发布了新的文献求助10
35秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
Hidden Empire of Finance: How Wall Street Profits from Our Cities and Fuels Global Inequality 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8166550
求助须知:如何正确求助?哪些是违规求助? 9559556
关于积分的说明 21750759
捐赠科研通 7757374
什么是DOI,文献DOI怎么找? 3429141
关于科研通互助平台的介绍 2553526
邀请新用户注册赠送积分活动 2473923