Corrosion inhibitor system for blocking polymer well by potassium persulfate injection

Purpose This paper aims to clarify the corrosion inhibition effect of different corrosion inhibitor systems on the corrosion of metal pipe string by potassium persulfate plugging agent, so as to improve the injection capacity of polymer plugging well and reduce the corrosion of steel by oxidant plugging agent. Design/methodology/approach The effect of different corrosion inhibitors on the corrosion inhibition of N80 carbon steel in 1% potassium persulfate solution was studied by electrochemical experiment and weight loss experiment. The corrosion inhibition mechanism of potassium persulfate inhibitor and the synergistic mechanism among different inhibitors were analyzed. Findings The results indicated that when the temperature was 50°C, the inhibition effect of 0.2% sodium molybdate with a single inhibitor was the best at pH 8.5, and the inhibition rate was 70.17%. The inhibition efficiency of 0.2% sodium molybdate + 0.3% sodium silicate in the composite inhibition system can reach 94.38%. In the temperature range of 20°C–60°C, with the increase of system temperature, the inhibition effect of corrosion inhibitor will gradually weaken. Originality/value The corrosion inhibition system of N80 steel in potassium persulfate oxidant was mainly studied, and it clarified the influence of temperature and pH value on the corrosion inhibition effect, which provided guidance and suggestions for the corrosion inhibition of tubular string in the oilfield.