Analysis of Negative Bias Temperature Instability Degradation in p-Type Low-Temperature Polycrystalline Silicon Thin-Film Transistors of Different Grain Sizes

This letter investigates degradation after negative bias temperature instability (NBTI) stress applied to LTPS TFTs with different polycrystalline-silicon grain sizes. The initial characteristics of the LTPS TFTs are similar regardless of grain size; however, we observed a different degree of degradation after NBTI depending on grain size. In general, after NBTI, both grain boundary traps and interface traps were generated. We found that the degree of NBTI degradation is dominated by the concentration of grain boundary traps, which themselves are a result of the different grain sizes that occur due to excimer laser annealing energy. At initial, dangling bonds in the grain boundaries and at the interface are passivated by hydrogen atoms, hence the initial characteristics are similar. Since the large grain of poly-Si initially generates more dangling bonds in the grain boundaries, after NBTI, hydrogen depassivation generates more grain boundary traps and causes much more serious degradation in device performance.