材料科学
印章(徽章)
扭矩
碳化钨
摩擦力矩
钨
有限元法
复合材料
转速
海洋工程
机械工程
冶金
结构工程
工程类
艺术
视觉艺术
物理
热力学
作者
Omar Morad,Vesa Saikko,Raine Viitala
出处
期刊:Wear
[Elsevier BV]
日期:2023-03-20
卷期号:523: 204763-204763
被引量:11
标识
DOI:10.1016/j.wear.2023.204763
摘要
This paper investigates the performance of marine thruster lip seals. Marine lip seals have received much less attention in the published literature than lip seals used in other fields. The main differences between marine and non-marine lip seals are the harder material compound, the higher oil pressure, and the larger diameters. The lip seals that are studied in this paper have a nominal diameter of 300 mm. The counterface is a tungsten-carbide-coated stainless steel shaft liner. The studied lip seals and their counterfaces are commonly used in marine applications. A full-scale test device is built to study the effects of marine-specific parameters on the behavior of the lip seal, using a parameter sweep of the oil temperature, oil pressure, and rotational speed. Air bearings are used to allow for a more accurate measurement of the frictional torque. The subsurface temperature at the contact is measured using a wireless temperature probe inside the rotating shaft liner. In future work, the subsurface temperature is used in a thermal finite element model to estimate the average contact temperature.
科研通智能强力驱动
Strongly Powered by AbleSci AI