EFFECT OF ELECTRIC PULSE TREATMENT ON MICROSTRUCTURE, ELECTROCHEMICAL AND DISCHARGE PROPERTIES OF AZ61 ANODES FOR Mg-AIR BATTERIES

In this work, the effects of electric pulse treatment on the discharge and electrochemical properties of rolled and extruded AZ61 as anode of Mg-air battery were studied. The microstructure, electrochemical behavior and surface morphology after discharge were discussed to relate the discharge performance. The experimental results show that compared with the original magnesium anode (rolled and extruded), the magnesium anode treated by electric pulse has more negative corrosion potential, lower impedance value, higher discharge voltage and better specific energy. This is because electric pulse treatment can cause the coarse second phase in magnesium anode to dissolve and the grains to become more uniform. In particular, in the discharge process, the surface of magnesium anode after electric pulse treatment will form micro cracks, which is beneficial to promote the self-stripping of discharge products. It is worth noting that the effect of electric pulse treatment on rolled anode is better than that of extruded anode. It may be due to the different dislocation density in the two anodes. During the electric pulse treatment, the dislocation density in the alloy is highly correlated with the dissolution rate of β-Mg17Al12, which ultimately affects the volume fraction of the second phase in the alloy.