Polarizer-Free Dye-Doped Liquid Crystal Sensors with High Precision

The surface-induced ordering of liquid crystals (LC) has been harnessed to detect a wide range of chemical and biological stimuli. In most sensor designs, the information-rich response of the LC is transduced from an analyte-triggered change in the out-of-plane orientation of the LC. Quantifying the out-of-plane LC orientation, however, is often complicated by simultaneous changes in the in-plane orientation of the LC when using polarized light for transduction. Here we introduce a sensing approach that combines a dichroic dye-doped LC (DDLC) with unpolarized light and a photodiode to achieve precise quantification of analyte-driven changes in the out-of-plane orientations of LCs. We benchmark the performance of the new methodology against polarizer-based approaches using a model amphiphilic analyte in aqueous solution and show that the DDLC provides a substantial reduction in the coefficient of variation (300% to less than 5%), an enhanced analytical sensitivity (0.16 to 3.73 μM–1), and an expanded dynamic range. In addition, when used to sense concentration gradients of analytes, the new approach distinguishes differences as small as 0.03 μM/μm over a dynamic range of 2 μM/μm, significantly outperforming conventional polarizer-based approaches that detect differences of 0.3 μM/μm over a dynamic range of 0.6 μM/μm. Overall, we conclude that the improved sensing performance and simpler implementation (no polarizers) of the DDLC approach, as compared to conventional LC sensors based on crossed-polars, will facilitate the deployment of LC sensors in diverse contexts, including the development of high-throughput screens for chemical formulations.