Effect of microfiber layers on acoustical absorptive properties of nonwoven fabrics

There are several types of sound absorptive materials, such as natural and synthetic fibers, acoustic mineral wool, acoustic polyester panels, acoustic foam, cotton batts, that reduce the acoustic energy of a sound wave as the wave passes through. In this work, the use of nonwoven materials made of cotton, polyester, and polypropylene fibers for the development of sound absorptive nonwoven materials has been investigated. Samples of different materials (cotton, cotton/polyester blend, polyester fibers needle punched, and polypropylene melt blown nonwoven) and multilayer structures were tested on the designed impedance tube. Acoustic absorption properties of the fiber assemblies were studied in the frequency region of 100–1500 Hz. The values of sound absorption coefficient for different samples indicated that polypropylene microfiber melt blown nonwoven sample displayed a good sound absorption behavior in the entire frequency range. The use of multilayer samples improves the sound absorption coefficient with the condition that one of the layers is a thin melt blown nonwoven layer. The formation of nonwoven absorbent material consisted of hybrid layers, significantly reduces the resultant average sound absorption coefficient, especially when the upper layer is made from finer fibers of melt blown nonwoven of low air permeability value, and in this case the improvement reaches 50%. The use of melt blown layers of fine fibers values of noise reduction coefficient may reach 0.8. The multilayer nonwoven sound absorber design should take into consideration specific noise reduction coefficient values, not the absolute ones, particularly when the weight of the absorber is playing a decisive role.