材料科学
复合材料
硅橡胶
涂层
复合数
天然橡胶
断层(地质)
硅酮
法律工程学
变形(气象学)
作者
Yan Du,Kai Liang,Yingjie Hu,Yutao Li,Xiangyang Zhao,Yang Wang
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2026-06-01
卷期号:: 1033-1036
标识
DOI:10.1109/icd64907.2026.11665437
摘要
Composite insulators as essential components in power systems, inevitably develop diverse insulating defects under complex operating conditions; these defects are major contributors to equipment failure. The study reports a dischargefault indicating composite coating with both electroluminescence and long afterglow indication characteristics, which is prepared by dispersing copper-doped zinc sulfide (ZnS: Cu) and strontium aluminate$\left(\mathbf{S r A l}_{\mathbf{2}} \mathbf{O}_{\mathbf{4}}\right)$in a room-temperature vulcanized silicone rubber (RTV) matrix. Using coaxial cylindrical and needle-plate electrode configurations, we systematically examined the spatial distribution, intensity and range of the coating's electroluminescence under high electric fields for different doping ratios, and the gray value and luminous power were linearly fitted. The results show that emission intensity increases with applied field strength and varies non-monotonically with doping ratio, increasing initially and then decreasing. Among them, an optimal luminescent performance is optimum at a ZnS: Cu to$\mathbf{S r A l}_{\mathbf{2}} \mathbf{O}_{\mathbf{4}}$mass ratio of 3%. Surface-potential decay, trap-level distribution and surface-flashover-voltage measurements indicate that an appropriate dopant concentration alters the RTV surfacetrap structure, facilitates surface-charge dissipation and, to some extent, enhances the material's flashover resistance.
科研通智能强力驱动
Strongly Powered by AbleSci AI