内阻
电池(电)
鉴定(生物学)
短路
电压
等效电路
控制理论(社会学)
工程类
断层(地质)
电子工程
电流(流体)
储能
能量(信号处理)
计算机科学
灵敏度(控制系统)
铅酸蓄电池
航程(航空)
故障检测与隔离
系统标识
观测误差
热阻
近似误差
最优化问题
汽车工程
热的
估计理论
作者
Guanzheng Li,Bin Li,Guirong Lu,Shuai Wang,Bin Liu
标识
DOI:10.1109/tpel.2025.3642989
摘要
High-rate lithium-ion batteries (LIBs), with high-power density, are widely used in electric vehicles and frequency regulation battery energy storage stations. However, they are more prone to lithium dendrites and internal short circuit (ISC) faults, a major cause of thermal runaway. Early ISC diagnosis is crucial for battery safety, especially identifying ISC resistance as an indicator of fault severity. However, its identification is limited by two factors. One is the time-varying nature of battery model parameters. The other is the weak features of early-stage ISC faults, which make accurate identification difficult. To this end, a model-parameter-independent method is proposed for ISC resistance identification with optimized current excitation. First, a simplified equivalent circuit model is derived by comparing the voltage responses of circuit parameters with the sampling error. Based on this simplified model, an identification method is developed without requiring parameter knowledge. Then, the Cramer-Rao lower bound theory is used to guide current profile optimization for improved accuracy. Finally, experimental results show that the optimized current reduces the relative error of early-stage ISC resistance identification at 25°C to 1.93%-5.02%, significantly better than the pre-optimization range of 7.11%-70.12%. Nail penetration experiment further demonstrates the method's effectiveness under real ISC conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI