阴极
涂层
化学
电解质
图层(电子)
电化学
基质(水族馆)
溶解
电池(电)
化学工程
氧化物
相(物质)
表面能
同步加速器
吸收(声学)
X射线光电子能谱
结构稳定性
纳米技术
表层
单层
电极
密度泛函理论
表面改性
储能
化学键
化学物理
作者
Baihui Meng,Chao Yi,Jian Wang,Yanqing Tian,Liangshuo Zhang,Shun Lu,Han Li,Xinpeng Wang,Yongxing Zhang
出处
期刊:Inorganic Chemistry
[American Chemical Society]
日期:2026-07-28
卷期号:65 (31): 18423-18438
被引量:1
标识
DOI:10.1021/acs.inorgchem.6c03122
摘要
LiNi0.5Co0.2Mn0.3O2 (NCM523) is a mainstream lithium-ion battery cathode material with high specific capacity, which is widely applied in energy storage and power batteries. Nevertheless, it suffers from transition-metal dissolution, structural phase transition, and interfacial side reactions during long cycling, causing rapid capacity fading and inferior stability, which restricts its large-scale application. Traditionally, the Al2O3 coating layer can effectively isolate the cathode material from direct contact with the electrolyte, alleviate electrolyte decomposition, and suppress transition-metal dissolution as well as interfacial side reactions. However, the underlying charge-transfer-driven bonding mechanism between the coating layer and cathode substrate remains insufficiently understood. Herein, a sol-gel method was used to prepare Al2O3-coated NCM523 with an optimal 1.0 wt % coating content. Electrochemical tests show that 1.0 Al-NCM delivers an initial discharge capacity of 177.1 mAh g-1 at 0.2 C, retains 80.3% capacity after 200 cycles at 0.5 C (8.4% higher than bare NCM523), and exhibits 138.2 mAh g-1 at 5 C. Beyond the conventional physical protection effect of the Al2O3 coating layer, X-ray photoelectron spectroscopy, synchrotron X-ray absorption spectroscopy, and density functional theory calculations reveal a charge-transfer-driven interfacial bonding mechanism between the Al2O3 coating layer and NCM523 substrate, featuring the formation of strong Al-O-TM bonds. The charge transfer across the interface promotes Al-O-TM bonding and regulates the surface electronic structure, thereby enhancing the structural reversibility and cycling stability of the layered cathode. These findings provide new insights into the active role of the Al2O3 interfacial layer in regulating surface chemistry and enhancing the structural stability of layered oxide cathodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI