电容器
材料科学
光电子学
电极
电容
快速热处理
电击穿
电压
电子工程
滤波电容器
电气工程
硅
温度测量
杂质
宽禁带半导体
分析化学(期刊)
退火(玻璃)
集成电路
锌化合物
作者
Keyou Tong,Jing Xu,Xinyue Zhang,Wenjun Zhang,Weibing Liu,Shuai Yang,Xuanyi Li,Haisu Gao,Binbin Xu,Jiahan Yu,Wenjuan Xiong,xiaoxue ji,jianhong liu,Xiaolei Wang,Jun Luo
标识
DOI:10.1109/led.2026.3719105
摘要
In this letter, Nb electrode engineering is proposed to enable low-temperature crystallization of ultrathin HZO, thereby extending its BEOL compatibility. Large$2{P}_{\text {r}}$values of 53.6/$56.4~\mu $C/cm2at 3/3.5 MV/cm are achieved by the positive-up-negative-down (PUND) method in 5-nm HZO with Nb electrodes (NHN) after$300~^{\circ }$C annealing, together with wake-up-free, negligible fatigue to 1E10 cycles (3 MV/cm, 100 kHz), and an extrapolated retention of 10 years at$85~^{\circ }$C. Specifically, the bottom Nb tends to form an Nb2O5cap layer during the ALD process owing to its more negative oxide formation enthalpy, which suppresses oxygen scavenging and serves as an oxygen reservoir, thereby mitigating the redistribution and generation of interfacial oxygen vacancies (${V}_{\text {O}}\text {)}$. Meanwhile, the top Nb provides uniform nucleation sites due to the smaller Nb/HZO interfacial mismatch (~6%), promoting O-phase formation at ultra-low temperature. The synergy of above effects enables excellent ferroelectricity at a thermal budget as low as$300~^{\circ }$C, which is of great interest for BEOL-compatible FeRAM applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI