材料科学
聚氨酯
涂层
热稳定性
聚对苯二甲酸乙二醇酯
极限抗拉强度
复合材料
玻璃化转变
聚合物
异氰酸酯
烧焦
化学工程
肿胀 的
模数
多元醇
聚乙烯
热塑性聚氨酯
增塑剂
热膨胀
结晶度
热分析
动态力学分析
弹性模量
高分子化学
热的
降级(电信)
杨氏模量
吸水率
比表面积
作者
Panachai Thusanaphoom,Jureeporn Yuennan,Wichain Chailad,Sineenard Songsri,Vanchai Laemlaksakul,Jennifer Rodon Fores,Yutthana Wongnongwa,Nathapong Sukhawipat
出处
期刊:ACS Polymers Au
[American Chemical Society]
日期:2026-08-05
卷期号:6 (5): 1468-1487
被引量:1
标识
DOI:10.1021/acspolymersau.6c00147
摘要
Upcycling of polyethylene terephthalate (PET) waste into high-value polymeric materials offers a promising pathway toward circular and sustainable polymer engineering. In this work, polyurethane (PU) films were synthesized from recycled PET (rPET)-based polyols, and the influence of the isocyanate index (NCO index: 100–200) on the network structure and functional properties of the resulting materials was investigated. FT-IR results supported the formation of urethane linkages between the rPET-based polyol and polymeric methylene diphenyl diisocyanate (PMDI), indicating successful network formation. Increasing the NCO index significantly enhanced cross-link density, reflected by an increase in gel content from 54.97 to 93.46% and a decrease in swelling ratio from 254.58% to 133.30%. This structural evolution led to improved mechanical performance, with tensile strength and Young’s modulus reaching 7.26 and 5.29 N/mm2, respectively. Thermal analysis further revealed an increase in glass transition temperature (−32.05–0.93 °C) and enhanced thermal stability with higher char yields (17.57–24.71%). Surface analyses demonstrated smoother, denser, and more hydrophobic morphologies at elevated NCO indices. An optimal balance of mechanical, thermal, and surface properties was achieved at NCO indices of 150–175, highlighting the potential of rPET-based PU films as sustainable coating and engineering materials for advanced applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI