材料科学
偷看
激光器
沟槽(工程)
制作
光学
紫外线
表面粗糙度
有限元法
纳秒
激光烧蚀
烧蚀
润湿
复合材料
各向异性
微通道
通量
表面光洁度
润滑
铸造
传热
激光功率缩放
波长
激光扫描
材料性能
光电子学
微透镜
平面的
表面改性
表征(材料科学)
作者
Xiaohui Wang,Enbing Qi,Yifan Wu,Xuan Sun,Xiuhua Men,Jianbin Wang,Junjie Zhang
出处
期刊:Photonics
[Multidisciplinary Digital Publishing Institute]
日期:2026-08-22
卷期号:13 (9): 803-803
标识
DOI:10.3390/photonics13090803
摘要
This paper comprehensively investigates the ultraviolet (UV) nanosecond laser fabrication of micro-groove textures on planar PEEK surfaces, as well as their surface performance in terms of wettability and frictional properties. Firstly, a three-dimensional finite element model, incorporating a moving Gaussian heat source, solid heat transfer and deformed geometry, was established to simulate the transient temperature field and ablation profile of PEEK during UV laser ablation. The predicted groove depth agreed with the experimental value with a low deviation of 11.19%. Based on the simulation and single-factor experiments, the optimized single-track laser parameters were determined as a laser power of 1.2 W, a scanning speed of 100 mm/s and a repetitive frequency of 100 kHz. Secondly, systematic single-factor and multi-pass laser ablation experiments of PEEK surfaces were conducted to fabricate micro-groove textures with precisely tailored geometric parameters. Furthermore, ablated surface characterization showed that the laser-textured surfaces exhibited increased roughness, apparent crystallinity up to 22.13%, and pronounced anisotropic wettability, with improved liquid spreading along the groove direction and restricted spreading across the grooves. Finally, fretting wear tests under simulated body fluid lubrication were carried out. The research findings reported in this paper provide a systematic theoretical and experimental basis for the application of UV nanosecond laser surface texturing in the fabrication of PEEK-based components.
科研通智能强力驱动
Strongly Powered by AbleSci AI