Analytical modelling of ultra-thin white topping cement concrete overlay on bituminous concrete pavement using ANSYS

Purpose The ultra-thin white topping (UTW) is a cement concrete overlay of the thickness of 50–100 mm on bituminous concrete pavements with surface failures. This is a long-lasting solution without having short-term failures. This paper aims to design an ultra-thin cement concrete overlay using a developed critical stress model with sustainable concrete materials for low-volume roads. Design/methodology/approach In this research paper, a parametric study was conducted using the ultra-thin concrete overlay finite element model developed with ANSYS software, considering the significant parameters affecting the performance and development. The non-linear regression equation was formed using a damped least-squares method to predict critical stress due to the corner load of 51 kN. Findings The parametric study results indicate that with a greater elastic modulus of bituminous concrete, granular layer along with 100 mm thickness of concrete layer reduces the critical corner stress, interface shear stress in a significant way responsible for debonding of concrete overlay, elastic strains in the pavement further the concrete overlay can bear infinite load repetitions. From validation, it is understood that the non-linear regression equation developed is acceptable with similar research work done. Originality/value From the semi-scale experimental study, it is observed that the quaternary blended sustainable concrete overlay having a high modulus of rupture of 6.34 MPa is competent with conventional cement concrete overlay in terms of failure load. So, concrete overlay with sustainable materials of 100 mm thickness and higher elastic modulus of the layers can perform in a sustainable way meeting the environmental and long-term performance requirements.