材料科学
微观结构
等温过程
锻造
复合材料
极限抗拉强度
再结晶(地质)
延展性(地球科学)
均质化(气候)
降水
动态再结晶
相(物质)
冶金
延伸率
铝化钛
钛合金
材料的强化机理
复合数
作者
Jiaming Zhang,Chen Fu,Yong-Qiang Ye,Chun‐Yu Shen,Yimin Zhuo,Shaopeng Li,Jianwen Le,Guangfa Huang,Yuanfei Han,Weijie Lu
出处
期刊:Rare Metals
[Springer Science+Business Media]
日期:2025-11-19
卷期号:44 (12): 10820-10836
被引量:8
标识
DOI:10.1007/s12598-025-03618-y
摘要
Abstract Isothermal forging is a crucial technique for finely tailoring the microstructure and achieving desirable mechanical properties in metastable β titanium alloys (β‐Ti), enabling the formation of complex components. However, research on isothermal forging of metastable β‐Ti based composites remains limited. Here, Ti‐55531 alloys and TiB/Ti‐55531 composites were isothermally forged in both (α + β) and β phase regions. The microstructure evolution, mechanical properties and strengthening/toughening mechanisms were thoroughly investigated. Isothermal forging promoted the refinement of matrix grains, homogenization of secondary α phase (α s ), and orderly arrangement of TiB whiskers. The forging temperature had a significant effect on the recrystallization behavior of β phase and the precipitation of primary α phase (α p ). The addition of TiB not only promoted discontinuous dynamic recrystallization but also facilitated the dispersion and precipitation of α p around TiB. Consequently, the mechanical properties of isothermal forged samples were significantly improved compared to the as‐casted ones, and the strength and ductility of the forged composites were both superior to those of the alloys. Specifically, the isothermal (α + β) forged composites achieved an excellent strength‐ductility balance, with a tensile strength of 1514 ± 16 MPa and a total elongation of 6.7% ± 0.2%. The strengthening and toughening mechanisms were mainly attributed to the hierarchical microstructure composed of intragranular α p , α s and α‐precipitate‐free zones, as well as the load‐bearing strengthening of TiB whiskers. Moreover, the α p closely adhered to TiB hindered crack propagation and relieved the stress concentration between transformed β structure and TiB by activating multi‐slip systems, thereby improving ductility and altering the fracture mode.
科研通智能强力驱动
Strongly Powered by AbleSci AI