RETRACTED: Tribological and microstructure studies of LM26/SiC metal matrix composite materials and structures for high temperature applications

Abstract This study aimed to investigate the tribological and microstructural characteristics of LM26 composites reinforced with silicon carbide to evaluate their suitability for high-temperature applications. For the sample fabrication, the modified stir-casting method was optimized using a Taguchi L16 orthogonal array. The wear rate and friction behavior were evaluated using the Taguchi’s S/N ratio analysis. When SiC was incorporated into the composite, the wear resistance increased by up to 15 wt%. The wear resistance of the LM26/SiC composite was improved compared to that of the pure LM26 aluminum alloy. The results of this study provide useful information to improve the wettability of metal matrix composites made from commercial-grade LM26 aluminum alloy by adjusting the SiC weight percentage. This type of composite has the potential as a replacement material for traditional applications such as heat sinks, heat exchanger fins, and electronic packaging.