阳极
过电位
锂(药物)
材料科学
硫系化合物
离子
电池(电)
扩散
电极
航程(航空)
导线
光电子学
电化学
化学
功率(物理)
复合材料
热力学
物理化学
有机化学
内分泌学
物理
医学
作者
Sean M. Wood,Kyle Christopher Klavetter,Adam Heller,Charles Buddie Mullins
摘要
The reversible charging of a lead chalcogenide, PbTe, was studied for use as the anode material in a Li-ion cell and compared to PbO. A similar series of Li–Pb alloys were formed but with Li2Te present instead of Li2O. In the presence of Li2Te, rapid Li–Pb alloying and dealloying were observed in the potential range of 0.01–0.7 V. In the potential range of 0.8–2.5 V, Li2Te formed and decomposed reversibly. Electrodes were cycled stably for 100 cycles at a C/5 rate in both potential domains. The electrodes were also cycled stably at rates up to 10C. The presence of Li2Te reduced the overpotential required at higher charge and discharge rates by acting as a superionic conductor to improve lithium ion diffusion. These results recommend this material for potential use in low-power applications such as cell phones.
科研通智能强力驱动
Strongly Powered by AbleSci AI