Analytical solutions for resonant radiation performance of bending-mode magnetoelectric antennas

This paper proposes analytical solutions for the resonant radiation performance of bending-mode magnetoelectric (ME) antennas. The strain-mediated Converse ME (CME) coupling model of bending-mode ME antennas is first established by solving nonlinear constitutive equations and bending governing equations using the elastic mechanics method. Then, the calculated magnetic flux and electric displacement are employed to propose a resonant radiation field model based on the dipole method. The numerical results for the CME coefficient show a good agreement with the experimental data. It can be observed that the volume fraction ratio of the piezoelectric layer can control the CME coefficient and radiation efficiency with the same variation trend since it can determine the bending strain via changing the location of the neutral layer of the ME antennas, which also demonstrates the strain-mediated essence of the ME antennas. In addition, the volume fraction ratio can tune the resonant frequency within a wide range. The gain of the ME antenna is stable and higher than −168 dB with the volume fraction ratio ranging from 0.2 to 0.7. The tensile stress and compressive stress have the opposite effect on the resonant frequency at low and high bias magnetic fields. Meanwhile, the tensile (compressive) stress is beneficial for both the radiation and gain in the low (high) bias field region. This model may facilitate the understanding of the bending-mode radiation mechanism of ME antennas and provide a basis for designing asymmetric ME antennas.