材料科学
聚吡咯
电化学
氮气
氨
纳米技术
化学工程
电极
复合材料
有机化学
聚合物
化学
聚合
工程类
物理化学
作者
Liang Zhang,Sizhe Liu,Xinyao Liu,Yue Han,Jiali Gu,Xinyue Wang
出处
期刊:NANO
[World Scientific]
日期:2023-12-27
卷期号:19 (01)
被引量:5
标识
DOI:10.1142/s1793292024500024
摘要
Designing and developing sensitive electrochemical sensors have always been paid attention to achieve the accurate detection of ammonia–nitrogen in the aqueous environment. Herein, a two-step electrodeposition route was used to achieve a Ni foam-supported polypyrrole nanospheres and Pt nanostars sensing electrode (Pt-PPy-Ni foam) for ammonia–nitrogen detection. After controlling the deposition time of Pt nanostars, the optimal Pt-PPy-Ni foam electrode exhibited greater electrocatalytic ability for ammonia oxidation reaction with a current density of 41.73 mA cm[Formula: see text] than that of Pt-Ni foam. This enhanced electrocatalytic ability could be attributed to the excellent adsorption of polypyrrole nanospheres for ammonia and the great catalytic activity of Pt nanostars for the ammonia oxidation reaction. This Pt-PPy-Ni foam electrode showed great detection performances with a sensitivity of 0.013 mA [Formula: see text]M[Formula: see text], and a detection limit of 8.72 [Formula: see text]M. Moreover, accepted results were obtained for the recovery measurements of lake and seawater samples with recoveries from 101.05% to 102.27% and 90.73% to 91.70%. In addition, Pt-PPy-Ni foam sensor exhibited good anti-interference ability with low current charges, reproducibility (relative standard deviation = 1.58%) and stability (relative standard deviation = 6.11%), showing a great application potential.
科研通智能强力驱动
Strongly Powered by AbleSci AI