材料科学
铜
烧结
选择性激光烧结
制作
胶粘剂
纳米颗粒
聚合物
复合材料
电极
冶金
纳米技术
图层(电子)
化学
病理
替代医学
医学
物理化学
作者
Seunghyun Back,Bongchul Kang
标识
DOI:10.1016/j.optlaseng.2017.09.027
摘要
Abstract Fabricating copper electrodes on heat-sensitive polymer films in air is highly challenging owing to the need of expensive copper nanoparticles, rapid oxidation of precursor during sintering, and limitation of sintering temperature to prevent the thermal damage of the polymer film. A laser-induced hybrid process of reductive sintering and adhesive transfer is demonstrated to cost-effectively fabricate copper electrode on a polyethylene film with a thermal resistance below 100 °C. A laser-induced reductive sintering process directly fabricates a high-conductive copper electrode onto a glass donor from copper oxide nanoparticle solution via photo-thermochemical reduction and agglomeration of copper oxide nanoparticles. The sintered copper patterns were transferred in parallel to a heat-sensitive polyethylene film through self-selective surface adhesion of the film, which was generated by the selective laser absorption of the copper pattern. The method reported here could become one of the most important manufacturing technologies for fabricating low-cost wearable and disposable electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI