固化(化学)
材料科学
乙烯基酯
聚合物
乙烯醇
单体
共聚物
化学工程
高分子化学
复合材料
工程类
作者
Liqiong Luo,Pingwei Liu,Kailun Zhang,Guodong Tang,Hongbing Hou,Bo‐Geng Li,Wenjun Wang
标识
DOI:10.1021/acsapm.0c00207
摘要
Polyolefins (POs) are considered a promising candidate for photovoltaic cell encapsulation due to their high volume resistivity, low water-vapor permeability, and outstanding outdoor stability. However, POs without functionalization have a low rate of cross-linking, which significantly slows the solar cell encapsulation process. Herein, we describe the use of a polymer product-engineering approach in which reactive pendent vinyl groups are controllably incorporated in PO polymer chains to accelerate their cross-linking reactions. The POs having limited vinyl functionalities of 0.02–0.37 mol % were synthesized via the copolymerization of ethylene, 1-octene, and vinylnorbornene or 1,9-decadiene at different monomer concentrations. The vinyl groups in the POs readily react with curing agents, increasing cross-linking rates by 14-fold up to 179.7 Pa·s –1, as measured by the enhancement of the storage modulus ( G′ ). The maximum G′ value representing the melt strength was also increased from 11.3 to 69.0 kPa due to the high curing degree in the POs. The use of a curing agent could be reduced by 50%, and no curing coagent was required in the PO curing process. The vinyl-functionalized POs had a light transmittance of 91%, a good volume resistivity of 7.05 × 10 16 Ω·m, a low water-vapor permeability of 2.31 × 10 –12 g·m·m –2 ·s –1 ·Pa –1, and an improved mechanical strength after curing. The damp-heat and UV aging had little effect on their light transmittance. Our approach of synthesizing functional POs with pendent vinyl groups thus promises the development of new high-performance polymer materials for photovoltaic cell encapsulation.
科研通智能强力驱动
Strongly Powered by AbleSci AI