脱氢
催化作用
氧化还原
吸附
化学
反应性(心理学)
烟气
钌
双金属片
无机化学
有机化学
物理化学
医学
病理
替代医学
作者
Yong Jin Liao,Haomiao Xu,Zihao Li,Leipeng Ji,Longlong Wang,Guanqun Gao,Wenjun Huang,Zan Qu,Naiqiang Yan
标识
DOI:10.1021/acs.jpcc.1c04100
摘要
Catalytic removal of CO from industrial flue gases has been an increasing concern. One attempt is utilizing the tail part of an SCR unit to oxidize abundant CO and trace “slip NH 3 ” synergistically. Herein, Ru/Cu-SSZ-13 was developed to conduct the oxidation of CO and the selective catalytic oxidation of NH 3 (NH 3 -SCO) simultaneously and showed 10 times higher reaction rates than Ru/SSZ-13 on both oxidations. The RuO 2 (110) surface was highly active for CO oxidation and NH 3 dehydrogenation but would turn insensitive due to the accumulation of adsorbed NO species (NO cus ), which derived from the peroxidation during NH 3 dehydrogenation. With the assistance of Cu-SSZ-13, generated NO cus could be consumed in an internal SCR route conducted by the activated Cu 2+ /Cu + redox cycle, which made NO cus available for the NH 3 preferential oxidation rather than the blocked reactive surface. Also, it promoted NH 3 transformation on the Cu-SSZ-13 side and boosted the regeneration of Ru-active sites from occupation by NO cus to enable simultaneous CO oxidation. Therefore, the reactivity of RuO 2 was boosted after minimizing the interference between the transformation paths of CO and NH 3 . Furthermore, due to the high NH 3 -SCO sensitivity of Ru/Cu-SSZ-13, the trace “slip NH 3 ” can be preferentially removed from CO-rich flue gas.
科研通智能强力驱动
Strongly Powered by AbleSci AI