被动性
铬
电阻抗
材料科学
腐蚀
电极
溶解
冶金
分析化学(期刊)
化学
电气工程
工程类
色谱法
物理化学
作者
Masazumi Okido,Kôichi Kimura,Takeo Oki
标识
DOI:10.2320/jinstmet1952.49.2_112
摘要
Electrode impedance changes of iron, chromium and SUS430 steel in potential domains of active dissolution, passivity and transpassivity were measured in 1 kmol/m3 Na2SO4 solution with the frequency range from 10−3 Hz to 104 Hz. The impedance changes of iron was also measured in 1 kmol/m3 Na2SO4 with chlorine ions.On the impedance diagram of iron, a negative resistance loop appeared after the induction time in active-passive transition potentials, and capacitive loops obtained at passivity potentials tended to increase in size with increasing potential and with holding time. On the impedance diagram of chromium and SUS430 at passivity potentials, the size of capacitive loop was larger than that of iron. The impedance diagram of iron changed remarkably in comarison with those of SUS430 and chromium at corresponding passivity potentials. The impedance of chromium showed no change with time, since a passive film was formed on the surface quickly. The impedance responce of iron in a pitting corrosion condition was different from that in the active corrosion condition. It was considered that the impedance of pitting corrosion was related to the formation of chloride film on the inside surface of pit.
科研通智能强力驱动
Strongly Powered by AbleSci AI