Friction from Chemical Mechanical Polishing (CMP) of integrated circuits can cause damage to surface and sub-surface layers. To understand potentially damaging CMP friction, a model is presented which separates the contributions of: 1) bare pad asperity to substrate junction contacts, 2) slurry nanoparticles in the pad asperity contacts, and 3) a proposed substrate area where slurry particles adhere to and are swept along with the moving asperity contact. The model is used to interpret data from pin-on-disk friction experiments performed with a fused silica wafer and various polymer polishing pad materials, flooded with 100 nm diameter silica nanoparticle slurries. The results showed that only 18% of the pad asperity junction contact area had active particles and contacts outside of the asperity area were 38 times of the asperity junction area. This suggests that 93% of CMP material removal activity results from particles outside of the asperity/substrate contact.