Compact low-voltage electro-optic Q-switch made of LiNbO3

This work presents a compact LiNbO 3 (lithium niobate, LN) electro-optic (EO) Q-switch with a lower driving voltage than the conventional LN Q-switches. By using non-direct cuts of a certain crystallographic orientation, a LN crystal is used both as a quarter-wave plate (QWP) and a pockels cell in a laser cavity. Through theoretical calculations and experiments, we have determined the optimized crystal orientations with low quarter-wave voltages (QWV). A set of compact LN EO Q-switches were prepared and used successfully in the pulse-on mode in a Nd:YAG laser. The Q-switched laser outputs are comparable to those obtained by using a conventional Z-cut LN Q-switch with a QWP. The QWV of the Q-switch with the optimized crystal orientation is 600V lower than that of the Z-cut LN Q-switch.