材料科学
等离子体子
粘附
钽
表面等离子共振
图层(电子)
光电子学
钛
折射率
电介质
纳米技术
共振(粒子物理)
基质(水族馆)
复合材料
纳米颗粒
冶金
物理
粒子物理学
海洋学
地质学
作者
Parinaz Sadri-Moshkenani,Mohammad Wahiduzzaman Khan,Mustafa Mert Bayer,Md Shafiqul Islam,Eric Montoya,Ilya Krivortov,Mikael Nilsson,Nader Bagherzadeh,Ozdal Boyraz
摘要
Plasmonic structures have a wide variety of sensing applications because of their high field localization effect that leads to high sensitivity at lower powers. Specifically, plasmonic nanohole arrays are attractive platforms for sensing because of their easy alignment and measurement. In terms of fabricating these sensors, usually an adhesion layer is needed to ensure firm contact between the plasmonic metal layer and the substrate. Most fabrication efforts rely on titanium or chromium based metallic adhesion layers. However, the presence of the adhesion layer may hinder the plasmonic resonance by broadening the resonance and reducing the plasmonic field enhancement. This leads to degradation of sensing capabilities. We investigate the effect of tantalum, chromium, and titanium adhesion layers on plasmonic sensors made of nanohole arrays. Using the bulk refractive index data for metallic adhesion layers, we show that tantalum has the potential to show less damping effect compared to commonly used chromium and titanium. However, it still causes significant damping because of its high absorption, which becomes even larger for tantalum thin film according to our ellipsometry measurement results. We also propose here to use MgO dielectric adhesion layers to avoid the damping effect. Our investigation on MgO adhesion layers shows strong adhesion properties without scarifying sensor performance. Moreover, we will present an alternate sensor geometry that is less prone to damping by the adhesion layer and that can enhance the plasmonic resonance even if there is a metallic adhesion layer.
科研通智能强力驱动
Strongly Powered by AbleSci AI