材料科学
电极
薄板电阻
氧化铟锡
光电子学
纳米线
图层(电子)
制作
纳米技术
聚乙烯吡咯烷酮
透射率
电容感应
接触电阻
电导率
导电体
复合材料
电气工程
病理
物理化学
工程类
化学
高分子化学
替代医学
医学
作者
Jun Wang,Jinting Jiu,Teppei Araki,Masaya Nogi,Tohru Sugahara,Shijo Nagao,Hirotaka Koga,Peng He,Katsuaki Suganuma
出处
期刊:Nano-micro Letters
[Springer Science+Business Media]
日期:2014-11-14
卷期号:7 (1): 51-58
被引量:145
标识
DOI:10.1007/s40820-014-0018-0
摘要
Transparent electrode based on silver nanowires (AgNWs) emerges as an outstanding alternative of indium tin oxide film especially for flexible electronics. However, the conductivity of AgNWs transparent electrode is still dramatically limited by the contact resistance between nanowires at high transmittance. Polyvinylpyrrolidone (PVP) layer adsorbed on the nanowire surface acts as an electrically insulating barrier at wire–wire junctions, and some devastating post-treatment methods are proposed to reduce or eliminate PVP layer, which usually limit the application of the substrates susceptible to heat or pressure and burden the fabrication with high-cost, time-consuming, or inefficient processes. In this work, a simple and rapid pre-treatment washing method was proposed to reduce the thickness of PVP layer from 13.19 to 0.96 nm and improve the contact between wires. AgNW electrodes with sheet resistances of 15.6 and 204 Ω sq −1 have been achieved at transmittances of 90 and 97.5 %, respectively. This method avoided any post-treatments and popularized the application of high-performance AgNW transparent electrode on more substrates. The improved AgNWs were successfully employed in a capacitive pressure sensor with high transparency, sensitivity, and reproducibility.
科研通智能强力驱动
Strongly Powered by AbleSci AI