Characterization of cavitation zone in cavitating venturi flows: Challenges and road ahead

Dynamic features of a cavitating venturi have been a topic of investigation for the past few decades. This review presents state-of-the-art of experimental and numerical studies in cavitating venturi to address the challenges in understanding flow behavior and developing reliable numerical models. Many experimental studies have shown that two strongly coupled mechanisms, namely, Re-entrant Jet and the bubbly shock influence the cavitation zone behavior. We provide pointers from the past and recent studies to the influence of geometry and operating conditions, introducing changes in cavity oscillation. From an operational viewpoint, the modeling studies need to predict four crucial parameters related to its steady and dynamic operation: choked mass flow rate, operating pressure ratio range, cavitation length, and frequency of cavity oscillations. In this paper, we discuss the possible ways to properly configure a one-dimensional (1D) model, which can be a handy tool for extracting the key integral parameters. Realistic predictions require direct numerical simulations, which is not always an economically viable option. Recent three-dimensional (3D) simulations with compressible formulations for flow field and a cavitation model coupled with large eddy simulations to handle turbulence have achieved some success in predictions. Many simplified approaches have been popular. In this paper, we systematically bring out the predictability limits of popularly used mixture models coupled with cavitation and turbulence in more commonly studied two-dimensional (2D) and fewer three-dimensional geometries. Two-fluid models could provide answers, but further studies are required to mitigate the modeling challenges and to enable realistic predictions of the steady and dynamic features of this elegant flow control device for a chosen application.