太阳能电池
薄脆饼
钝化
晶体硅
光伏
平面度测试
降低成本
工程物理
硅
机械工程
制造成本
材料科学
太阳能电池效率
纳米技术
工艺工程
光伏系统
工程类
光电子学
电气工程
化学
管理
结晶学
经济
图层(电子)
作者
Mohd Khairunaz Mat Desa,Suhaila Sapeai,Ayu Wazira Azhari,Kamaruzzaman Sopian,M.Y. Sulaiman,Nowshad Amin,Saleem Hussain Zaidi
标识
DOI:10.1016/j.rser.2016.03.004
摘要
The back-contact crystalline silicon solar cell represents an advanced configuration in which inter-digitated positive and negative contacts are placed on the rear surface. Highest conversion efficiency, elimination of shading losses, co-planarity of cell interconnections, and uniform black appearance, represent some of the most significant features of this type of solar cell. However, the manufacturing process complexity leads to significantly higher production cost making it difficult to compete with conventional mono and poly crystalline Si-based Photovoltaics industry. Over the years, an increasing number of researchers have reported on methods and processes aimed at reduction in manufacturing cost. This review paper attempt an extensive review of several categories of back-contact silicon solar cells, relevant design innovations, specific cost advantages especially in terms of using lower lifetime materials, their efficiency advantages in terms of geometry and wafer type, and their manufacturing technologies. In addition, available simulation tools for numerical investigation on back-contact structures and advanced device concepts have also presented in order to better understand underlying physical considerations in terms of passivation, both surface and volume, and minority carrier lifetime.
科研通智能强力驱动
Strongly Powered by AbleSci AI