In Situ Current-Accelerated Phase Cycling with Metallic and Semiconducting Switching in Copper Nanobelts at Room Temperature

Here, a current-accelerated phase cycling by an in situ current-induced oxidation process was demonstrated to reversibly switch the local metallic Cu and semiconducting Cu₂O phases of patterned polycrystalline copper nanobelts. Once the Cu nanobelts were applied by a direct-current bias of ∼0.5 to 1 V in air with opposite polarities, the resistance between several hundred ohms and more than MΩ can be manipulated. In practice, the thickness of 60 nm with a moderate grain size inhibiting both electromigration and permanent oxidation is the optimized condition for reversible switching when the oxygen supply is sufficient. More than 40% of the copper localized beneath the positively biased electrode was oxidized assisted by the Joule heating, blocking the current flow. On the contrary, the reduction reaction of Cu₂O was activated by the thermally assisted electromigration of Cu atoms penetrating the interlayer at the reverse bias. Finally, based on a high on/off ratio, the fast switching and the scalable production, reusable feasibility based on copper nanobelts such as the memristor array was demonstrated.