阳极
电化学
材料科学
硒化物
电极
电流密度
钠离子电池
纳米颗粒
化学工程
兴奋剂
碳纤维
纳米技术
化学
复合材料
冶金
光电子学
复合数
物理化学
法拉第效率
工程类
物理
硒
量子力学
作者
Miao Jia,Yuhong Jin,Chenchen Zhao,Peizhu Zhao,Mengqiu Jia
标识
DOI:10.1016/j.jallcom.2020.154749
摘要
Transition metal selenide (TMS) is recognized as a prospective alternative anode material for the sodium ion battery application because of its high conductivity and high theoretical capacity. Herein, a simple hydrothermal method was used to prepare the ZIF-8 cubes and then followed by a selenization process to fabricate ZnSe nanoparticles decorated with hollow N-doped carbon (ZnSe/HNC) nanocubes. Our selenides exhibit good electrochemical sodium storage properties. It delivers a high initial discharge and charge capacities of 526.9 and 319.5 mAh g−1 at a current density of 100 mA g−1. The reversible capacity of as-prepared ZnSe/HNC nanocube electrode can be maintained at 335.7 mAh g−1 after 50 cycles at the current density of 100 mA g−1. As for rate capacity, the high reversible capacities of ZnSe/HNC nanocube electrode are 323.6, 306.9, 290.2, 262.0, 202.4, 173.6 and 115.4 mAh g−1 at different current densities of 100, 200, 500, 1000, 2000, 3000, 5000 mA g−1, respectively. In addition, the stability of the ZnSe/HNC nanocube electrode at high current density was also obtained. It can release a high and stable capacity of 251.1 mAh g−1 after 500 cycles at a current density of 500 mA g−1. The electrochemical sodium storage process and the reaction mechanism of the ZnSe/HNC nanocube electrode were confirmed by Ex-situ XRD study. Meanwhile, kinetic analysis of the electrochemical Na+ storage characteristics of the ZnSe/HNC nanocube demonstrates that the behavior of the external pseudocapacitor significantly contributes to good rate performance and good long cycle life. The good sodium storage performance of our ZnSe/HNC nanocube anode material can be attributed to the confinement of charge and discharge products for as-prepared ZnSe/HNC nanocube electrode material and the alleviation of volume change effect for our electrode material during cyclic process. This method can be used to adjust other TMS morphologies and structures to develop a new kind of anode materials for sodium ion battery applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI