金属间化合物
材料科学
焊接
球栅阵列
倒装芯片
复合材料
微观结构
回流焊
粒度
接头(建筑物)
图层(电子)
冶金
印刷电路板
合金
结构工程
工程类
操作系统
胶粘剂
计算机科学
作者
Tao Xu,Min-Bo Zhou,Zejun Zhang,Xing-Fei Zhao,Xinping Zhang
出处
期刊:International Conference on Electronic Packaging Technology
日期:2019-08-01
标识
DOI:10.1109/icept47577.2019.245329
摘要
In this study, Sn3.0Ag0.5Cu (SAC305) solder balls with various diameters were used to fabricate cross-scale SAC305/Cu joints (from micro-bump joints to flip chip-BGA and then to board level BGA joints). Four different reflow peak temperatures of 300, 250, 200 and 150 °C were adopted for step-reflow processes. The interfacial reactions, evolution of microstructures, interfacial intermetallic compound (IMC) growth and Cu 6 Sn 5 grain morphology change in cross-scale SAC305/Cu joints were investigated systematically. The results show that the proportion of IMC in cross-scale SAC305/Cu joints increases with decrease of solder diameter. The IMC layer in small joints is thicker than that in large joints during step-reflow processes because small solder joints have sufficient supply of Cu atoms for growth of Cu 6 Sn 5 . During step-reflow processes, the thickness of interfacial IMC layer increases with increasing the number of reflow cycles in crossscale SAC305/Cu joints regardless of diameters of solder balls.
科研通智能强力驱动
Strongly Powered by AbleSci AI