佩多:嘘
有机太阳能电池
材料科学
化学工程
纳米技术
光电子学
图层(电子)
聚合物
复合材料
工程类
作者
Hemraj Dahiya,Rakesh Suthar,Manish Kumar Singh,Rahul Singhal,Supravat Karak,Ganesh D. Sharma
标识
DOI:10.1021/acsaelm.3c01372
摘要
The imperative for achieving commercial success in organic solar cells (OSCs) lies in their efficient and stable operation within open-air environments, which enables large-scale production while concurrently reducing manufacturing costs. Poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) is usually used as a hole transporting material in the conventional configuration of OSCs; however, the observations reveal inferior stability due to its acidic and hygroscopic tendency. Therefore, introducing a hole transport layer (HTL) for replacing PEDOT:PSS is essential for OSCs. This work highlights both these issues; a simple and low-cost solution-processed Co3O4 HTL was developed for nonfullerene-based OSCs in open-air conditions. The cobalt(II) acetate tetrahydrate (CATH) and adipic acid precursors were used to synthesize the Co3O4 HTL under ambient conditions through one-shot mixing. To control the electronic properties of the Co3O4 HTL thin film, thermal annealing (TA) and UV–ozone (UVO) post-treatment were employed. OSCs with the Co3O4 HTL afford an excellent power conversion efficiency of 14.13% for the PM6:Y6 absorber layer, which is much higher than that of the control PEDOT:PSS (12.62%) and CATH (13.01%) counterpart. Interestingly, the derived Co3O4 HTL-based OSC exhibited higher stability with the continuous illumination of AM1.5G lights under ambient conditions. In conclusion, this work emphasizes the pivotal role of solution-processed Co3O4-based HTLs in advancing the efficiency and stability of nonfullerene OSCs, contributing to the advancement toward efficient and sustainable photovoltaic technologies.
科研通智能强力驱动
Strongly Powered by AbleSci AI