喷嘴
发电机(电路理论)
风力发电机
工程类
海洋工程
航空航天工程
结构工程
计算机科学
风力发电
物理
电气工程
功率(物理)
量子力学
标识
DOI:10.1016/j.jweia.2025.106080
摘要
The paper presents a novel design of a wind gust generator based on an adaptive nozzle for wind tunnel applications and its experimental investigation. The key feature of this design is the movable upper wall of the nozzle, which adjusts the cross-section of the nozzle’s outlet. For this purpose, the upper contour of the nozzle is connected to a programmable and fast-moving tooth belt axis, enabling rapid changes in the nozzle geometry to generate reproducible horizontal wind gusts that develop along a flat ground plate. The experimental setup primarily relies on particle-image velocimetry as an optical measurement technique, supported by a constant-temperature anemometer and pressure taps at specific locations. The gusts are generated using a well-defined motion pattern of the movable nozzle, following a ( 1 − cos ) -type signal. A combination of velocity and surface pressure measurements is carried out, analyzing the gust development at various positions along the ground plate in streamwise direction. Both data sets are used to quantify the adaptive nozzle’s potential as an effective tool for wind gust generation, facilitating future studies on highly dynamic fluid–structure interactions under wind gust load . Additionally, the well-designed experiment is planned to serve as a valuable validation case for numerical methods .
科研通智能强力驱动
Strongly Powered by AbleSci AI