Designing Acoustic Reconfigurable Intelligent Surface for Underwater Communications

The UnderWater Acoustic (UWA) communication is the foundation for oceanic information applications. However, existing UWA systems suffer from low data rate problem. Although the Multiple Input Multiple Output (MIMO) scheme is proved to be able to increase channel capacity in many terrestrial scenarios, the high cost and complexity of acoustic MIMO significantly limit its usage. Recently, the acoustic reconfigurable intelligent surfaces (acoustic RIS) concept has been proposed to address the aforementioned problem. In this paper, with the real-world constraints taken into consideration, three key components of the acoustic RIS are designed to realize the underwater RIS concept, including the new acoustic RIS hardware, the ultra-wideband (UWB) beamforming, and practical operation protocol. Specifically, a completely new hardware design of acoustic RIS is first provided, since existing electromagnetic RIS designed for terrestrial environments do not work for underwater acoustic waves. Then, the UWB beamforming solution is developed, since underwater acoustic RIS need to control the acoustic signals, whose bandwidth is comparable to its carrier frequency. Finally, the practical operation protocol is developed to realize the acoustic RIS functionalities in complex underwater environment. The acoustic RIS design is validated through both COMSOL multiphysics simulations and end-to-end Bellhop-based simulations.