Nano-emulsions are de ned as a class of emulsions with uniform and extremely small droplet size, typically in the range 20-200 nm [1,2]. Due to their characteristic size, nano-emulsions appear transparent or translucent (resembling microemulsions) and possess stability against sedimentation or creaming. The formation of kinetically stable liquid-liquid dispersions of such small sizes is of great interest from fundamental and applied viewpoints. Nano-emulsions are also referred to in the literature as miniemulsions [3-5], submicrometer-sized emulsions [6], nely dispersed emulsions [7], ultra ne emulsions [8], and so on. The term “nano-emulsion” has been increasingly adopted because it gives an idea of the nanoscale size range of the droplets and it is concise. Nano-emulsions, being nonequilibrium systems, require energy input for their formation, either from mechanical devices or from the chemical potential of the components [9]. The methods using mechanical energy are called dispersion or high-energy emulsi cation methods while those making use of the chemical energy stored in the components are referred to as condensation or low-energy emulsi cation methods [10]. Nano-emulsions are generally prepared by dispersion or high-energy emulsi cation methods. However, there is an increasing interest in low-energy methods, which in this chapter are classi ed as “self-emulsi cation” [11] and “phase transition” [12-14] methods. In the selfemulsi cation methods, emulsi cation is achieved by a dilution process without phase transitions taking place in the system. As it is discussed below, it is not always easy to make a clear distinction between some so-called spontaneous methods and phase transitions because emulsi cation is often achieved by both mechanisms. The phase transition methods make use of the chemical energy released during the phase transitions that take place during the emulsi cation process. Among these methods, the phase inversion temperature (PIT) method introduced by Shinoda in 1968 [12] is based on the changes in solubility of polyoxyethylene-type nonionic surfactants with temperature. Other low-energy emulsi cation methods take advantage of the phase transitions that take place by changing the composition at constant temperature during emulsi cation [13,14] (i.e., phase inversion composition, PIC, method). Low interfacial tension values and the presence of lamellar liquid crystalline or bicontinuous microemulsion phases (i.e., surfactant aggregates with zero or almost zero curvature) are among the factors that have been shown to be important for the formation of nano-emulsions with minimum droplet size. However, other type of structures, such as micellar cubic liquid crystalline phases and the kinetics of the emulsi cation process have been reported to play a key role in the properties of the resulting nano-emulsions.