SIMULATION OF WORK OF AN ENGINE WORKING WITH COMBUSTION INITIATION FROM IGNITION DOSE OF FUEL

The paper presents analysis of fuelling and of the course of combustion process for a two-cycle engine. The main idea of the engine according to patent solution of Prof. B. Sendyka consists in the fact that engine work begins from spark ignition, whereas, at higher load and higher temperature in the cooling system there occurs switching off spark ignition and transition to ignition from an ignition dose injected directly into the combustion chamber. Such an engine possesses two injection systems: one system of multi-point injection which forms homogenous mixture, whereas, the other system of direct injection is used for ignition dose injection only. After injection of the ignition dose of a very small mass combustion is initiated on the basis of formation of auto-ignition centres so as it takes place during knock combustion. Auto-ignition centres initiate combustion of the basic charge. Simulation was carried out in order to perform analysis occurring phenomena of fuel feeding and combustion. Works on it started from elaboration of a computational grid of the engine and subsequently analysis of indicated diagrams of engine work with injection of ignition dose was performed. Analysis was also performed of temperature traces and of traces of charge mass change in the cylinder as well as of participation of the mass of basic fuel dose in the cylinder in function of the crank angle. Moreover visualization of effects of the process of mixture formation and combustion was performed and presented in form of illustrations of charge temperature distribution, fraction of fuel ignition and basic dose vapours in crosssections of the combustion chamber.