Properties of Blisters Formed on Polymer Films and Differentiating them from Nanobubbles/Nanodrops

When studying surface nanobubbles on film-coated substrates, a class of bubble-like domains called blisters are probably forming at the solid-liquid interface together with nanobubbles. This may easily lead to a misunderstanding of the characteristics and applications of surface nanobubbles and thus continue to cause problems within the nanobubble community. Therefore, how to distinguish surface nanobubbles from blisters is a problem. Herein, the morphology and properties of blisters are investigated on both smooth and nanopitted polystyrene (PS) films in degassed water. The morphology and contact angle of blisters are similar to those of surface nanobubbles. However, blisters were observed to be punctured under the tip-blister interaction and be torn broken by an atomic force microscope tip during the process of scanning. At the same time, nanopits on the surface of blisters that formed on a pitted PS film can be seen clearly. These provide direct and visual evidence for distinguishing blisters from surface nanobubbles. In addition, surface nanobubbles and blisters on smooth and pitted PS films in air-equilibrated water are studied. No punctured surface nanobubble was observed, and the force curves obtained on surface nanobubbles and the change in height of blisters and surface nanobubbles under a large scanning force show that surface nanobubbles are much softer than blisters.