Ka波段
天线(收音机)
计算机科学
航空航天工程
电信
工程类
作者
Jonathan Sauder,Nacer Chahat,Richard Hodges,Eva Peral,Yahya Rahmat‐Samii,Mark Thomson
出处
期刊:54th AIAA Aerospace Sciences Meeting
日期:2016-01-02
被引量:12
摘要
While the capabilities of CubeSats have greatly increased in the past years, one of the key problems hindering interplanetary CubeSats are data communication rates. To compensate, a Ka-band high gain antenna would provide a 10,000 times increase in data communication rates over an X-band patch antenna and a 100 times increase over state-of-the-art S-band parabolic antennas. Unfortunately, high gain antenna developments to this point have only focused on S-band, which does not provide the required gain. Two years ago, JPL initiated a research and technology development effort to design a half-meter Ka-band parabolic deployable antenna (KaPDA) which would stow in 1.5U (15 cm x 10 cm x 10 cm) and provide 42dB of gain (or 50% efficiency). The process of designing, building, and testing of KaPDA is discussed in this paper. The design uses folding ribs to fit in the stowage space, deep rib sections with precision hinges to maintain surface accuracy, and a combination of an innovative gas and spring system to deploy the antenna. The constructed antenna was demonstrated to achieve a gain of 42.5 dB before deployment, and a gain of 42 dB after deployment. KaPDA would create opportunities for a host of new CubeSat missions from enabling high rate deep space communications to radar science.
科研通智能强力驱动
Strongly Powered by AbleSci AI