材料科学
机械加工
可塑性
本构方程
开阔视野
机械
固体力学
应变硬化指数
应变率
非线性系统
流动应力
硬化(计算)
结构工程
复合材料
有限元法
物理
工程类
冶金
图层(电子)
钢筋混凝土
量子力学
作者
Y. B. Guo,Qiuling Wen,Keith A. Woodbury
出处
期刊:Journal of Manufacturing Science and Engineering-transactions of The Asme
[ASM International]
日期:2005-12-11
卷期号:128 (3): 749-759
被引量:78
摘要
Work materials experience large strains, high strain rates, high temperatures, and complex loading histories in machining. The problem of how to accurately model dynamic material behavior, including the adiabatic effect is essential to understand a hard machining process. Several conventional constitutive models have often been used to approximate flow stress in machining analysis and simulations. The empirical or semiempirical conventional models lack mechanisms for incorporating isotropic/kinematic hardening, recovery, and loading history effects. In this study, the material constants of AISI 52100 steel (62 HRc) were determined for both the Internal State Variable (ISV) plasticity model and the conventional Johnson-Cook (JC) model. The material constants were obtained by fitting the ISV and JC models using nonlinear least square methods to same baseline test data at different strains, strain rates, and temperatures. Both models are capable of modeling strain hardening and thermal softening phenomena. However, the ISV model can also accommodate the adiabatic and recovery effects, while the JC model is isothermal. Based on the method of design of experiment, FEA simulations and corresponding cutting tests were performed using the cutting tool with a 20 deg chamfer angle. The predicted chip morphology using the ISV model is consistent with the measured chips, while the JC model is not. The predicted temperatures can be qualitatively verified by the subsurface microstructure. In addition, the ISV model gave larger subsurface von Mises stress, plastic strain, and temperature compared with those by the JC model.
科研通智能强力驱动
Strongly Powered by AbleSci AI