材料科学
退火(玻璃)
中子反射计
双层
接受者
反射计
聚合物太阳能电池
活动层
有机太阳能电池
异质结
能量转换效率
化学工程
光电子学
分析化学(期刊)
图层(电子)
纳米技术
聚合物
中子散射
复合材料
有机化学
光学
散射
膜
小角中子散射
化学
物理
工程类
时域
薄膜晶体管
生物化学
计算机科学
计算机视觉
凝聚态物理
作者
Kwan Hee Lee,Yuliang Zhang,Paul L. Burn,I. Gentle,Michael James,Andrew R. J. Nelson,Paul Meredith
摘要
Control over the structure of donor/acceptor blends is essential for the development of solution processable organic solar cells (OSCs). We have used time-resolved neutron reflectometry (NR) and in situ annealing to investigate the nanoscale structure and interdiffusion of sequentially spin-coated thin films of poly(3-n-hexylthiophene-2,5-diyl) (P3HT)/[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and correlated the evolving structure with the device performance. While the as-prepared film shows a clear two-layer structure it is evident that (19 wt%) PCBM has percolated throughout the lower P3HT layer. Upon heating, analysis of time-resolved NR data shows that the diffusion process is dependent on the annealing temperature. At temperatures up to 110 °C, the two-layer structure is retained and only a small amount of PCBM diffuses from the interface into the lower layer, increasing the total PCBM content throughout the P3HT layer to 26 wt%. Significantly, this small change in acceptor content leads to a profound increase in device performance; with the power conversion efficiency (PCE) of the OSCs increasing from 0.47% (unannealed, 19 wt% PCBM) to 3.23% (annealed, 26 wt% PCBM) with the latter showing a similar efficiency to devices prepared from a blend containing 50 wt% PCBM. Further annealing at 120 and 130 °C sees rapid interdiffusion between the two layers, along with an overall expansion in the thickness of the bilayer film. Despite the complete intermixing of the PCBM and P3HT to form a structure resembling a bulk heterojunction, essentially no improvement in device performance was observed for annealing at temperatures above 110 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI