钝化
材料科学
阈值电压
光电子学
图层(电子)
薄膜晶体管
晶体管
电子工程
溶解过程
无定形固体
电压
GSM演进的增强数据速率
铟
傅里叶变换红外光谱
降级(电信)
氧化物薄膜晶体管
锌
活动层
过程(计算)
工艺优化
氧化物
傅里叶变换
镓
析因实验
红外线的
红外光谱学
偏压
作者
Qingfei Hu,Jihoon Kim,Yanfei Sun,Bo Liu,Yong Xiong,Inchul Choi
标识
DOI:10.1002/sdtp.70003_283
摘要
To solve the problem of negative shift of the threshold voltage (Vth) in the corner and edge regions of the 8‐Mask back‐channel etched (BCE) amorphous indium gallium zinc oxide thin‐film transistors (a‐IGZO TFTs) substrate, Fourier transform infrared spectroscopy (FTIR) was employed to investigate the spatial variation in chemical composition of the passivation layer (PV1‐ 1) and its correlation with Vth uniformity in a‐IGZO TFTs. Through the optimization of the passivation layer process, the threshold voltage range (A Vth) was reduced from 29.2 V to 2.2 V, significantly improving the electrical uniformity of IGZO‐TFT devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI