Natural Silkworm Cocoon-Based Hierarchically Architected Composite Triboelectric Nanogenerators for Biomechanical Energy Harvesting

Silk-based triboelectric nanogenerators (TENGs) have been demonstrated as an ideal platform for self-powered systems. The source of silk, Bombyx mori, entails a valuable ingredient, sericin (SS), viewed as a binder in composites. Interestingly, SS is rich in the amorphous region, possibly resulting in triboelectrification enhancement between the amorphous region and the crystallization region when subject to external pressure. However, most researchers remove the SS component when designing silk-TENGs to eliminate immunological responses as implantation in vivo through complicated degumming, rehydration, and dialysis procedures. Herein, integral SS retention was utilized to fabricate silk-TENGs without affecting the output performance. We designed, for the first time, an ultra-robust and natural silkworm cocoon layer (SCL)/polydimethylsiloxane (PDMS)–TENG as an energy harvester to scavenge waste energy from human motions. The working mechanisms and influence of operational parameters are explored and studied. Working in the contact-separation mode, the electrical outputs of the SCL/PDMS–TENG in terms of open-circuit voltage, short-circuit current, and power density reaches 126 V, 3 μA, and 216 mW/m 2, respectively. The integrated self-charging TENG is demonstrated to power small electronic electronics and monitor human motions. This work widens a new dielectric material selection with SS retention to boost the output performance of TENGs for practical applications.