材料科学
石墨烯
碳化
激光烧蚀
制作
纳米技术
光电子学
激光器
数码产品
超级电容器
电容
复合材料
光学
电极
电气工程
化学
物理化学
替代医学
扫描电子显微镜
病理
工程类
物理
医学
作者
Haiyang Yu,Jing Bian,Mengxin Gai,Xincheng Huang,Lei Liu,YongAn Huang
标识
DOI:10.1016/j.apsusc.2024.160889
摘要
Laser-induced graphene (LIG) has found widespread applications in various carbon-based electronics, such as sensors, optoelectronics, and energy storage devices, due to its low cost, high efficiency, and large-scale fabrication potential. Here, two laser-induced carbonization techniques are investigated in terms of structural integrity (uniformity and densification) and electrical property by a combined experimental and theoretical approach; these techniques, namely interface and surface ablation, operate in confined and ambient environments, respectively. The property of LIG for each laser-induced carbonization technique is systematically studied using optical and electrical characterization methods. The results show that the naturally confined and oxygen-free environment of interface ablation can fabricate more compact and intact LIG than surface ablation in an open and oxygen environment, thus enabling a 7.6 times reduction of the square/sheet resistance. The underlying mechanism for these improved properties is the compressive thermal stress and higher carbonization efficiency of interface ablation. The better structural integrity and electrical property of interface-ablated graphene enable a four-fold improvement in the specific areal capacitance of supercapacitors. These findings present that interface ablation is a more effective and facile method to enable the scalable preparation of intact and highly conductive LIG for its potential use in high-performance carbon-based electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI