共单体
极限抗拉强度
材料科学
生物材料
甲基丙烯酸酯
表面改性
接触角
复合材料
共聚物
嫁接
聚合物
高分子化学
化学
纳米技术
物理化学
作者
Nur Ain Mohd Radzali,Norsyahidah Mohd Hidzir,Irman Abdul Rahman,Abdul Khaliq Mokhtar
出处
期刊:Open Chemistry
[De Gruyter Open]
日期:2021-01-01
卷期号:19 (1): 1207-1215
被引量:9
标识
DOI:10.1515/chem-2021-0112
摘要
Abstract Evaluating the mechanical properties of expanded polytetrafluoroethylene (ePTFE) is essential to measure its resistance to permanent deformation from an applied force. These mechanical ePTFE properties must be comparable to the properties of real tissue. Various hydrophilic comonomers 2-hydroxyethyl methacrylate (HEMA), N-isopropylacrylamide (NIPAAM), and N-vinylcaprolactam were used individually for copolymerization with acrylic acid (AA) to be grafted onto ePTFE using the gamma irradiation-induced grafting method. After surface modification, the hydrophobic and mechanical properties of ePTFE were altered. The water uptake and contact angle measurement showed that the modified ePTFE was less hydrophobic (∼500%, θ < 90°) than the unmodified ePTFE (0%, θ = 140°). Moreover, the mechanical properties of ePTFE changed after the modification process due to the polymer grafted onto the ePTFE surface. The data from mechanical tests, such as Young’s modulus (74–121 MPa), ultimate tensile strength (5–9 MPa), and elongation at break (56–121%), obtained for the sample AA-co-HEMA and AA-co-NIPAAM remain within the ranges and are considered desirable for use as a biomaterial. The mechanical strength correlates well with the percentage of the grafting yield after the modification process and is dependent on the parameters used, such as irradiation dose and type of comonomer.
科研通智能强力驱动
Strongly Powered by AbleSci AI