采暖系统
相变材料
环境科学
储能
热能储存
功率(物理)
热的
汽车工程
气象学
海洋工程
工程类
机械工程
生态学
热力学
生物
物理
作者
Shilei Lu,Bowen Xu,Xiaolei Tang
标识
DOI:10.1016/j.renene.2019.06.086
摘要
Abstract Phase change material (PCM) can be integrated into floor heating system to store excess heat, releasing it when needed, thus effectively reducing the mismatch between energy supply and demand. In this study, a double pipe PCM floor heating system with three independent heating modules was proposed for clean energy heating in rural China. A 26-day experimental study was conducted to study the operation effect of the system under four different strategies. Strategy 1: partial power operation strategy; Strategy 2: daytime energy storage strategy; Strategy 3: nocturnal energy storage strategy; and Strategy 4: phased energy storage strategy. In the early stage of heating, the average temperature of experiment room was 18.9 °C and the daily temperature fluctuation was controlled within 2.1 °C, which showed an effective guarantee of indoor comfort under Strategy 1. In the late stage of heating, the differences in indoor temperature fluctuations could be caused by changes in outdoor climate and operation strategies. And operating strategy had less impact on indoor temperature distribution. Moreover, the experiment results revealed that the system could provide a comfortable indoor thermal environment while adjusting operational strategies. And the 3 °C average daily temperature fluctuation confirmed the feasibility of creating a comfortable environment with gentle temperature fluctuations via the PCM floor intermittent heating.
科研通智能强力驱动
Strongly Powered by AbleSci AI