化学
化学工程
钙
钙环
氧化钙
吸附
无机化学
水溶液
核化学
过程(计算)
碳酸钙
氧气
工作(物理)
作者
Nurfanizan Mohd Afandi,Abreeza Manap,Meenaloshini Satgunam,Savisha Mahalingam,Farrukh Nagi,Salmi Mohd Yunus,Faiz Arith
标识
DOI:10.1080/01496395.2026.2618047
摘要
This study presents a novel sonochemical synthesis method for CaO-based sorbents, incorporating natural additives to enhance CO2 capture capacity and cyclic stability in the calcium looping process. In this study, we introduce a sonochemical synthesis approach, enhanced with biopolymer (starch) and clay-based (kaolin and bentonite) additives to overcome the drawbacks of sintering and agglomeration of CaO-based sorbents over multiple cycles, limiting long-term performance. The novelty of this study lies in combining sonochemical treatment with low-cost and natural additives to enhance both porosity and long-term stability of the sorbents. Structural analysis confirmed a 62.3% reduction in CaCO3 grain size and a 61.4% increase in pore volume post-sonication. The 10 wt% starch further increased porosity by 16.5%, resulting in an 87% improvement in CO2 capture capacity at the 10th cycle (from 5.39 mmol/g of the unmodified limestone to 10.08 mmol/g). Concurrently, the initial CO2 capture capacity was enhanced from 7.87 mmol/g sorbent (unmodified) to 9.23 mmol/g sorbent (starch-modified CaO), which corresponds to an improvement of 17.3%. These improvements are attributed to the increase in pore volume and the anti-sintering roles of the additives. Although capture efficiency declined after the ninth cycle, the findings highlight a promising and scalable pathway for enhancing the durability and reactivity of CaO-based sorbents. This study advances low-cost, high-efficiency carbon capture solutions aligned with sustainable materials engineering and climate mitigation goals.
科研通智能强力驱动
Strongly Powered by AbleSci AI